Liftgate specification introduction

1、 Specification for installation equipment of liftgate

1. The liftgate must be equipped with corresponding airbag protection device. This device is installed on it, which can rebound to the fully open state in case of emergency failure, so as to play a protective role.

2. The lifting door shall be equipped with anti spring breaking devices and some self-protection devices to prevent steel wire spring breaking, so as to play the role of self-protection.

3. It is also necessary to install a motor protection device for overload and failure after excessive use on the liftgate.

4. For the installation of various locks on the door, it is necessary to carry out linkage and interlocking, so as to better avoid damage to equipment and personnel caused by operation errors.

5. An emergency pause device shall be installed on the lifting door to stop its operation in time in case of sudden emergency problems.

6. On the control box, some necessary interfaces should be installed, such as radar interface, fire interface and geomagnetic interface, so that the linkage control of these devices can be realized more easily.

2、 Functional specification of liftgate

1. The liftgate must have good thermal insulation and sealing functions, because they are used in the factory, so the products in the factory need to be well protected, some can't enter water, and the temperature can't fluctuate too much. Therefore, the liftgate must have good thermal insulation and sealing functions.

2. The lifting door is used in the factory. Of course, its quality should be very high-quality, and its anti-theft function should be complete. Firmness is its primary condition, so that it can effectively prevent external forces from damaging it.

3. The liftgate also needs to have the functions of receiving and electric switch and intelligent control, so as to facilitate its flexible use.

For the category of liftgate, its specifications should be relative to the field of use. It should be able to play a practical role and function in the factory.